NEC Cell Phone i Series User Manual

Soft Key Glossary  
92600GLO02  
April 2001  
Printed in U.S.A. (2562)  
 
i-Series Soft Key Glossary  
Both  
Used when programming Call Forwarding with the Follow  
Me feature. This will allow both extensions to ring.  
Bypass  
Appears when calling an extension which is set for Call  
Forwarding. By pressing the BYPASS key, the Call  
Forward/DND Override feature is activated, allowing the  
call to ring the originally called extension.  
Camp  
Camp On/Callback: Appears when placing an intercom  
call. If pressed, it activates the Call Waiting/Camp On fea-  
ture, or if you hang up, it activates the Callback feature.  
OR  
Camp On/Callback: Appears when you try to place an outgo-  
ing call and all trunks are busy. This key allows you to Camp  
On or program a Callback when a line becomes available.  
Cfwd  
Call Forward: Programs an extension for Call Forwarding.  
CfwTo  
Call Forward To: Appears when programming Do Not  
Disturb to block forwarded calls.  
CLR  
Clear: Allows you to clear Message Waiting or Callback  
requests either left for you or that you left for someone else.  
CnCF  
Cncl  
Cancel Call Forwarding.  
Cancel: Used when Call Forwarding is active. Pressing this  
key will deactivate Call Forwarding.  
OR  
Cancel: When programming Selectable Display Messaging, this  
allows you to cancel your action and return to an idle display.  
CnRp  
CO  
Cancel Repeat Redial: Appears on an idle display when the  
Repeat Redial feature is activated. Pressing CNRP will cancel it.  
Central Office: Used when programming Call Forwarding  
to forward only C.O. calls.  
OR  
Allows you to forward all your central office calls to your  
Personal Greeting.  
Conf  
Conference: Appears while on an active call. Pressing  
CONF will allow you to set up a Conference call.  
Comb  
Combine Page Zone: When programming Park and Page,  
this option is used to page both internal and external page  
zones when you have a call.  
 
i-Series Soft Key Glossary  
Dev  
Dir  
Device: Used with Call Forwarding to determine the type of  
forwarding to be used (display/Selectable Display Messages,  
Off-Premise Call Forwarding, Personal Greeting).  
Directory: Use the directory list to place an intercom call to  
an extension.  
OR  
Directory: Appears when joining calls in a Conference call.  
You can use Directory Dialing to call an extension.  
Disp  
Display: Used when programming a Selectable Display  
Message in the Call Forwarding feature.  
DND  
ExPg  
Do Not Disturb  
External Page: Used to make an external page.  
Ext  
External Page Zone: Used when programming Park and Page  
to select the external page zone you wish to use.  
OR  
External: Appears when programming Do Not Disturb to  
block external calls.  
Fctn  
Flw  
Grp  
Function: Pressing this key allows you to define  
Programmable Function Keys.  
Follow Me: Used when programming Call Forwarding to  
activate the Follow Me feature.  
Group: Appears when programming Abbreviated Dialing.  
This allows you to program a group Abbreviated Dialing  
number.  
ICM  
Intercom: Allows access to intercom options.  
OR  
Intercom: When Callback is enabled, this allows you to  
cancel all intercom Camp On or Callbacks.  
OR  
Intercom: Appears when programming Do Not Disturb to  
block internal calls.  
Imm  
InPg  
Immediate: Used when programming Call Forwarding to  
immediately forward calls.  
Internal Page: Used to make an internal page.  
 
i-Series Soft Key Glossary  
Int  
Internal Page Zone: Used when programming Park and  
Page to select the internal page zone you wish to use.  
OR  
Intercom: When programming Call Forwarding, this allows  
you to program your phone to forward only intercom calls.  
OR  
Intercom: Appears when programming an extension’s inter-  
com call type: ringing or voice announce.  
Line  
Line Callback: Allows you to cancel central office Camp  
On or Callbacks.  
More  
MW  
More options are available for viewing.  
Message Waiting: An extension can use this key to return a  
Message Waiting left by another extension.  
OR  
If the CLR key is pressed, MW allows you to clear Message  
Waiting requests you left or that someone left for you.  
MsgA  
Message Answer: When an extension has messages, this  
appears allowing the extension to return the Message  
Waiting or call Voice Mail.  
MsgWt  
Message Wait: Appears when placing an intercom call. If  
pressed, it activates the Messaging Waiting feature for the  
called extension.  
NA  
No Answer: Used when programming Call Forwarding to  
forward calls only if the call is not answered.  
OffP  
Off Premise: Used when programming Off-Premise Call  
Forwarding.  
OneT  
OvRd  
One Touch key programming.  
Override: Appears when placing a call to an extension that  
is set for Do Not Disturb. Pressing OVRD will override the  
DND setting, if your extension has that ability.  
Page  
While programming Park and Page, this allows you to  
record your Page announcement.  
PgPU  
PGrt  
Used to answer a Meet-Me Page that has been set.  
Personal Greeting: Used when programming a Personal  
Greeting within the Call Forward menu.  
Prev  
Previous: View previous menu.  
 
i-Series Soft Key Glossary  
Prog  
Program station options.  
R:7 L:5 E:3  
While programming Park and Page or Personal Greeting,  
this allows you to record (R:7), listen (L:5), or erase (E:3)  
your message.  
Revd  
Ring  
Received: Appears when cancelling Message Waiting or  
Callback requests. This key will clear requests that anyone  
has left for you.  
Appears when programming an extension’s intercom call  
type. Press RING if you want your extension to ring when  
you receive an intercom call.  
OR  
Appears when placing a call to an extension. This allows you  
to change an intercom call you place from voice announce to  
ringing. Once RING is pressed, it changes to VANN.  
Rls  
Release: Allows you to return the phone’s display to an idle  
condition.  
Rpt  
Save  
Repeat Redial: Pressing this key activates the Repeat Redial  
feature.  
Save: Used when programming a Selectable Display  
Message. This key saves the displayed programmed message.  
OR  
Used when programming a Personal Greeting to save your  
message.  
OR  
Used when recording a Park and Page greeting to save  
your message.  
OR  
Appears when placing an outgoing call. Pressing this key  
will enable the Save Number Dialed feature, allowing you  
to redial the number using a function key/code.  
Sent  
Set  
Appears when cancelling Message Waiting or Callback requests.  
This key will clear all requests you left for any extensions.  
Used with Do Not Disturb to set the type of DND.  
OR  
Appears when joining calls together for a Conference call.  
Pressing SET places the call on hold and allows you to  
either add another call to the Conference or press BEGIN  
to join all the calls together.  
 
i-Series Soft Key Glossary  
Sta  
Station: Used with Call Forwarding to determine the type of  
forwarding to be used.  
Sys  
System: Appears when programming Abbreviated Dialing.  
This allows you to program a system/common Abbreviated  
Dialing number.  
Trf  
Transfer: Transfers a call to another extension.  
VAnn  
Voice Announce: Appears when placing a call to an exten-  
sion which is programmed to receive ringing intercom  
calls. This allows you to change an intercom call you place  
from ringing to voice announce. Once VANN is pressed, it  
changes to RING.  
VMsg  
Voice Message: Appears when placing an intercom call. If  
pressed, it transfers you to the voice mailbox for that extension.  
OR  
Voice Message: If you have voice mail messages, pressing  
VMSG allows you to access the voice mail.  
Voic  
Zone  
Voice: Appears when programming an extension’s intercom  
call type. Press VOIC if you want your extension to voice  
announce incoming intercom calls.  
After selecting the Park and Page feature, this will appear to  
allow you to program what page zone should be used when  
announcing your page.  
Used when programming a Selectable Display Message.  
After entering a message number, press any soft key, then  
to scroll down through the programmed messages.  
Used when programming a Selectable Display Message.  
After entering a message number, press any soft key, then ↑  
to scroll up through the programmed messages.  
 
NEC America, Inc., Corporate Networks Group  
4 Forest Parkway, Shelton, CT 06484  
TEL: 203-926-5400 FAX: 203-929-0535  
cng.nec.com  
 

Miele Dishwasher PG 8083 SCVi User Manual
Napoleon Fireplaces Stove NPI40 User Manual
National Instruments Network Card 374318A 01 User Manual
Nikon Camcorder 1 J2 User Manual
NuTone Outdoor Storage Vienna Series User Manual
Olympus Camera Flash FL 50 User Manual
Onkyo Stereo Receiver TX SR604 604E User Manual
Optoma Technology Projector HD71 User Manual
Panasonic Cordless Telephone KX TG1311BX User Manual
Paradyne Network Card TAM1500 12 User Manual