Link electronic Stereo Amplifier DigiFlex 1152 User Manual

1000 SERIES DIGIFLEX

LINK ELECTRONICS, INC.

ANALOG VIDEO DISTRIBUTION AMPLIFIER 1 X 8

DigiFlex 1152

MADE IN THE USA

FEATURES

‹ Eight Outputs

‹ Differential Input

‹ DC or AC Coupled

‹ Op Amp. Technology

‹ ±3dB Gain, each set of four

‹ 100 MHZ Bandwidth

Mounting Frame Options

1000 - Single Power Supply, Holds 11 Modules

1000/2 - Dual Power Supply, Holds 10 Modules

7200 - Mounting Frame, Holds 1 Module

‹ Diff. Gain and Phase 0.1

The DigiFlex 1152 Video DA represents the state

of the art in analog video distribution. The 1152

provideshigh-performancevideodistributioninthe

LINK DigiFlex 1000 Frame. The advantage is

obvious: both analog and digital distribution

amplifiers can operate side-by-side in a single

frame!

DC-coupled differential input is a standard feature,

providing high common-mode rejection. Eight

outputs are available on the companion rear cell,

model 1011. The front panel gain control adjusts

the level to ±3dB.

The attention to detail in the design of the 1152

extends to the power supply, which features a

simple switching regulator. While slightly more

complex than a linear supply, this offers the

highest possible efficiency. Backed by a ten-year

warranty including parts and labor. The 1152 will

provide years of trouble-free service.

Utilizing the latest CMF Op-Amp technology, the

1152 combines wide bandwidth, low noise, and

low power consumption. The video path is truly

transparent, with differential phase and gain errors

of <0.1°and <0.1%, respectively. Video signal-to-

noise ratio exceeds 65dB.

LINK

ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668

Phone 573 334 4433 FAX 573 334 9255

‹